Aluminium Cuprum et genus Connectors bimetallic
Technical data
| Model | Conductor Cross-section(mm2) Cum 6-50 Al 16-70 | Repagula |
| CAPG-A1 | Cum 10-95 Al 25-150 | 1×M8×40 |
| CAPG-A2 | Cum 6-50 Al 16-70 | 1×M8×45 |
| CAPG-B1 | Cum 10-95 Al 25-150 | 2×M8×45 |
| CAPG-B2 | Cum 25-185 Al 35-200 | 2×M8×50 |
| CAPG-B3 | Cum 6-50 Al 16-70 | 2×M10×60 |
| CAPG-C1 | Cum 10-95 Al 25-150 | 3×M8×45 |
| CAPG-C2 | Cum 25-185 Al 35-240 | 3×M8×50 |
| CAPG-C3 | Cum 35-240 Al 35-300 | 3×M10×60 |
| CAPG-C4 | 3×M10×70 |
Materia
Altum robur aluminium mixturae fictis.Curatio superficiei: Bright.
Product proprietas
ALPG adhibetur pro conductoribus connectendis vel ramosis AAC, AAAC vel ACSR.Fibulae altam fictis viribus gignit.Slotted foramina admittunt moderamine varios conductores in utraque parte.Eius generis test secundum IEC61238-1.
Technical data
| Model | Conductor Cross-section(mm2) | Repagula |
| APG-A1 | Al 16-70 | 1×M8×40 |
| APG-A2 | Al 16-150 | 1×M8×45 |
| APG-B1 | Ad 16-35 | 2×M6×35 |
| APG-B2 | Al 16-70 | 2×M8×45 |
| APG-B3 | Al 16-150 | 2×M8×50 |
| APG-B4 | Al 25-185 | 2×M10×60 |
| APG-C1 | Al 16-70 | 3×M8×45 |
| APG-C2 | Al 16-150 | 3×M8×50 |
| APG-C3 | Al 25-240 | 3×M10×60 |
| APG-C4 | Al 35-300 | 3×M10×70 |
Parallel sulcus Clamps Cuprum extruditur genus
Fibulae duas parallelas nudas conductores coniungere constituebatur.Conductores aeris destitutus vel caesus esse potest.Materia est aeris connexio per totum conductorem aeris ad aes fictum patens.Fibulae transversales striatae serratae ad maximam conductoris contactum, aereis valvis utuntur et lavatores Belleville utuntur ne thermas sub oneribus cyclicis ratchetas impediant.Fibulae oxydatum inhibitoris obductis.et incorrupta botls et nuces cum washers ad opus erat.
pro tap-off conductores hospites aeris ace.DIN 48201
Materia
Corpus: Aeris mixturae
Bolts: chalybe vel immaculata ensem Nuces: DIN 934, chalybs Surface: uncoated
| Model | Bolt Torque | Conductor Range mm2 | Dimensiones mm OD | No./Size of Bolts |
| CU6-70-2 | 20Nm | 6 ad 70 | 2.7 ad 10.5 | 2×M8 |
| CU16-95-2 | 20Nm | 16 ad 95 | 5.1 ad 12.5 | 2×M8 |
| CU16-150-2 | 30Nm | 16 ad 150 | 5.1 ad 15.7 | 2×M10 |
| CU150-240-2 | 40Nm | 150 ad 240 | 15.7 ad 20.3 | 2×M12 |
| CU300-400-3 | 40Nm | 300 ad 400 | 22.6 ad 26.7 | 3×M12 |
